While I am DJing in Windows, the music randomly stops and I must restart the DJ software to get sound gain.
Product number : 4780583
4781018
4782002
Disable Windows preset made to save energy on the USB.
This preset is set on by default, and it may cause crackling in the sound, and even disconnect the DJ controller on the computer.
This preset is set on by default, and it may cause crackling in the sound, and even disconnect the DJ controller on the computer.
- Right-click on My computer > Properties > Device Manager > Universal Serial Bus controllers,
- Right-click on the first line "USB Root Hub" and click "Properties"
- Go to the tab "Power Management", and uncheck the box "Allow computer to turn off this device to save energy"
- Click "OK" and close the dialog box
- Repeat the same operation on each line called USB Root Hub or USB hub.
Knowledge base
- Optimize your Windows settings for DJing 19-02-2023 - To avoid crackling, popping sound and distortion, you should optimize your Windows computer for DJing. If it feels like your Windows computer is slow for DJing, you should try making the following ...
- My DJ Console Rmx or DJ Console 4-Mx or DJ 4Set was working perfectly in Windows 7 (or Windows 8.0), but is no longer properly detected since I’ve installed Windows 10. 19-02-2023 - If you have a USB 3.0 port on your PC, and have not yet updated your DJ controller’s drivers, then your DJ controller is running an old firmware version: the DJ controller will not be detected in W...
- My DJ Console Rmx or DJ Console 4-Mx or DJ 4Set, which used to work in Mac OS 10.10 or earlier, is not detected on my MacBook with Mac OS 10.11 (El Capitan) or 10.12 (Sierra). 22-11-2022 - If your MacBook has USB 3.0 ports, it may be a timing issue: Mac OS 10.11 and 10.12 have different timing than earlier versions of Mac OS. In that case, you should try to connect the DJ controller to ...
- If the audio tracks are stored on a USB key, the playback quality is bad. 19-02-2023 - In Windows, you should not play your music tracks stored on a USB key for DJing purposes. You should 1) copy the audio tracks from the USB key to your computer hard drive first, 2) then remove th...
- iTunes tracks are not visible in VirtualDJ LE 22-11-2022 - First, close the VirtualDJ LE software. Make sure that the iTunes option to share the iTunes library XML with other applications is enabled. To do so: Open iTunes, go to Edit > Prefer...
- The microphone is not recorded in the DJ software 22-11-2022 - On DJ controllers, the microphone input is often wired directly to the master output (this is called a pass-through mode) to avoid the latency software may add, but the microphone's sound can only be ...
- My DJ controller is not detected in Traktor Pro 2 22-11-2022 - The Traktor Pro 2 software supports Hercules DJControl and DJConsole controllers using a MIDI mapping file with a TSI extension. The required TSI files can be downloaded for all Hercules controllers d...
- My DJ controller’s buttons don’t light up in Traktor Pro 2 22-11-2022 - Open Traktor Pro 2: In Preferences (Windows: File > Preferences / macOS: Traktor > Preferences), go to the Controller Manager section Make sure that your DJ controller is selected not only...
- My DJ controller is detected in Traktor Pro 2, but there is no sound 22-11-2022 - If your DJ controller has a built-in audio interface: Connect your speakers to the DJ controller's Master output, or output 1-2 (not to the computer's audio output). Connect your headphones ...